Toshiba DK 16, DK8 manual P70 002 YZ

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES

SECTION 100-816-600

MARCH 1993

TABLE RM-AJ

PROGRAM 70

VERIFY ACCOUNT CODE/TOLL RESTRICTION ASSIGNMENT

STEP		ACTION		DISPLAY/PRINTOUT
1	Enter Program Mode		>MODE PROG
	At the >MODE prompt, enter P R O G CR.		P
2	Enter Program Number 70		P 70
	Press CR.		P70
3	Refer to the System Record Sheet, and enter the required code		P70	002 YZ
	number (000 ~ 299).
	Example: code number 002; Enter: 0 0 2.
	The system will display the present digit Restrict (Y) and Toll
	Restriction Status (Z) for entered code number.
4	Refer to the System Record Sheet, and enter the required		P70	002 YZ 13
	digit Restrict and Toll Restriction data.
	Example: digit Restrict (1) and Toll Restriction (3);
	Enter: 1 3.
5	To Exit Program/Store Data		P70	002 YZ 13
	A)	To store data, press CR.	P70	##
	B)	Continue returning to step 3 until all Program 70 data	P
		is entered.
	C)	To exit this program, press # # CR.

NOTE:

Programs 77-1and 77-2, use Type 1 procedure.

-40-