Toshiba DK8, DK 16 manual Table RM-BD Program LCR Area Codes, P51, 212

	REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
			SECTION 100-816-600
			MARCH 1993
	TABLE RM-BC
	PROGRAM 50-6
	LCR DIAL ZERO TIMEOUT
STEP	ACTION		DISPLAY/PRINTOUT
1	Enter Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 50	P 50
	Press CR.	P50
3	Enter the number 6	P50	6 06 10
	The system will display the present dial zero timeout.
	Refer to the System Record Sheet and change if required.
	Example: 10, enter 1 0.
4	Exit Program/Store Data	P50	6 06 10
	A) To store data, press CR.	P50	##
	B) To exit this program, press # # CR.	P

TABLE RM-BD

PROGRAM 51

LCR AREA CODES

STEP			ACTION			DISPLAY/PRINTOUT
1	Enter Program Mode				>MODE PROG
	At the >MODE prompt, enter P R O G CR.				P
2	Enter Program Number 51				P 51
	Press CR.				P51
3	Refer to the System Record Sheet and enter the required				P51	1
	route plan number (1 ~ 8).
	Example: Route plan 1, enter 1.
4	Enter 2, 3, or 4 SPACE				P51			2, 3 or 4
	• 2 — To add area codes to table.						Plan No.
	• 3 — To delete area codes from table.
	• 4 SPACE — to display area codes in table,				P51
		continue to press SPACE to display more codes.
		Press CR to exit display.						<— CODES
5	Enter codes	or	*	and	P51
	press SPACE after each code entry.
6	Exit Program/Store Data				P51	12
	A) To store data, press CR.				or	212
	B) Continue returning to step 3 until all data has been
	entered for this program.				P51	##
	C) To exit this program, press # # CR.				P

-53-