Toshiba DK8, DK 16 manual Action DISPLAY/PRINTOUT, P38 00# 31

		REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
				SECTION 100-816-600
				MARCH 1993
		TABLE RM-AE
		PROGRAM 38
		DIGITAL AND ELECTRONIC TELEPHONE BUTTONSTRIP TYPE
STEP		ACTION		DISPLAY/PRINTOUT
1	Enter the Program Mode		>MODE PROG
	At the >MODE prompt, enter P R O G CR.		P
2	Enter the Program Number 38		P 38
	Press CR.		P38
3	Refer to the System Record Sheet and enter the		P38 00
	required port number. Example: Port 00, enter 0 0.
4	Press #. The system will display the present		P38	00# 31
	telephone code.
5	Refer to the System Record Sheet and enter		P38	00# 31 21
	the required telephone code number.
	Example: Code 21, enter 2 1.
6	To Exit Program/Store Data		P38	00# 31 21
	A)	To store data, press CR.	P38	##
	B)	Continue returning to step 3 until all Program 38	P
		data is entered.
	C) To exit this program, press # # CR.

-35-