Toshiba DK8, DK 16 manual Table RM-AQ, P45 01 N Y, P45 Nnnnn

	REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
			SECTION 100-816-600
			MARCH 1993
	TABLE RM-AP
	PROGRAM 45-2
	TOLL RESTRICTION DISABLE
STEP	ACTION		DISPLAY/PRINTOUT
1	Enter the Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 45	P 45
	Press CR.	P45
3	Enter the number 2.	P45	2
4	Refer to the record sheet and enter the required CO line number.	P45	2 01 N
	Example: CO line 01, enter 0 1. The system will display
	N or Y to define if the LED is on or off.
5	Refer to the System Record Sheet and change the CO line	P45	2 01 N Y
	status as required (Y or N).		02 N
	Press SPACE to step to next CO line number.
6	To Exit Program/Store Data	P45	2 01 N Y
	A) To store data, press CR.		02 N
	B) To exit this program, press # # CR.	P45	##
		P

TABLE RM-AQ

PROGRAM 45-3 ~ 6

EQUAL ACCESS, SPECIAL COMMON CARRIER NUMBERS, and AUTHORIZATION CODE DIGIT LENGTH

STEP	ACTION		DISPLAY/PRINTOUT
1	Enter Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 45	P 45
	Press CR.	P45
3	Refer to the record sheet and enter the item number (3 ~ 6).	P45	3 NNNNN
	Example: Item 3, enter 3. The system will display
	the present equal access number or EA1 Code.
4	Refer to the System Record Sheet and enter the required number.	P45	3 NNNNN 12345
	Example: 12345, enter 1 2 3 4 5 CR.	P45
5	Enter code number 4. The system will display present authorization	P45	4 00 12
	code digit length. Refer to the System Record Sheet and enter	P45
	the required authorization code number digit length.
	Example: 12, enter: 1 2 CR.
6	To exit this program, press # # CR.	P45	##
		P
NOTE:
Items 5 and 6 are entered the same way as 3 and 4, respectively.

-45-