q LIGHT [LIGHT] (p. 10)
Turns the light for display and keypad ON or OFF.
w PTT SWITCH [PTT] (p. 11)
Push and hold to transmit; release to receive.
e TUNING DIAL [DIAL] (p. 8)
➥Rotate [DIAL] to select the desired frequency. (default)
➥Rotate [DIAL] to select the BANK number. (default)
➥Rotate [DIAL] to select the memory channel or WX channel number. (default)
➥Rotate [DIAL] to adjust the audio level.
r EXTERNAL SPEAKER AND MICROPHONE JACKS [MIC/SP]
Connect an
t ANTENNA CONNECTOR [ANT]
Connects the supplied antenna.
y FUNCTION DISPLAY (pgs. 6, 7)
u UP/DOWN KEYS [Y]/[Z] (p. 8)
➥Push [Y] to increase the audio level, push [Z] to
decrease the audio level. (default)
➥Push to select the operating channel or fre-
quency.
➥Push to select the BANK number.
PANEL DESCRIPTION 2
i SQUELCH KEY [SQL (SCAN)] (p. 9)
➥ Push [SQL], then rotate the [DIAL] (or push [Y]/[Z]) to select the squelch level.
•24 squelch levels and squelch open (0) are available.
➥ Push 
, then push [SQL] to starts scan func- tion:
Frequency mode: Frequency scan function.
MEMORY mode: Bank scan or Full memory chan-
nel scan function.
o POWER SWITCH [PWR]
➥Push and hold for 0.5 sec. to turn the power ON or OFF.
➥While pushing and holding [Y]/[Z] key, push [PWR] to enter the cloning function mode. (OPC- 967 must be connected.)
!0CLR KEY [CLR (DIAL/YZ)] (p. 8)
➥ Push | , then push [CLR] to exchange the e |
tuning Dial function and u UP [Y]/DOWN [Z] switch function;
-Dial: tuning (default)
-UP [Y]/DOWN [Z]: audio level setting (default)
NOTE: You can adjust the audio level via [DIAL] and select the frequency, memory channel or BANK number via UP [Y]/DOWN [Z] keys.
➥Push [CLR] to turn to the frequency mode, when memory channel, WX channel or 121.5 MHz is selected.
3
