Icom IC-FR3000 manual Specifications, General

SECTION 1 SPECIFICATIONS

			IC-FR3000			IC-FR3100
	Measurement method		EIA / TIA-603			ETS 300 086
	Frequency range		[USA2], [GEN2], [GEN4], [GEN74], [EUR2], [FRG2]: 150.000–174.000 MHz
			[GEN74]:			148.000–172.000 MHz
	Type of emission		Wide (25 kHz):			16K0F3E
			Middle (20 kHz):			14K0F3E
			Narrow (12.5 kHz):			8K50F3E
	Channel spacing		[USA2], [GEN2], [GEN4], [GEN74], [EUR2]:			25/12.5 kHz
			[FRG2]:			20/12.5 kHz
	Frequency stability		±2.5 ppm			±1.0 kHz
GENERAL	Number of channels		Max. 32 channel
	Antenna connector		Type-N ⋅ 2 (50 Ω)
		AC	[USA2], [GEN2]:	100–120 V
	Power supply requirement		[GEN4], [GEN74], [EUR2], [FRG2]:	220–240 V
		DC	13.6 V DC (negative ground)			13.2 V DC (negative ground)
		TX	TX (at 50 W) 15.0 A			TX (at 25 W) 10.0 A
	Current drain (approx.)
			RX (max. audio) 2 A
		RX
			(stand-by)			1 A
	Operating temperature range		–30˚C to +60˚C (–22˚F to +140˚F)			–25˚C to +55˚C
	Dimensions (proj. not included)		410(W) ⋅ 110(H) ⋅ 360(D) mm; 16.1 (W) ⋅4.3 (H) ⋅ 14.1 (D) inch
	Weight (approx.)		12 kg; 26.5 lb
	RF output power (High/Low)		50/10 W			25/5 W
TRANSMITTER
	Adjacent channel power		[Wide], [Middle]: 70 dB, [Narrow]: 60 dB
	Modulation system		Variable reactance frequency modulation
	Maximum frequency deviation		[Wide]: ±5.0 kHz, [Middle]: ±4.0 kHz, [Narrow]: ±2.5 kHz
	Spurious emissions		70 dBc typical		0.25 µW ≤ 1GHz, 1.0 µW > 1 GHz
	Input impedance			600 Ω
	Receive system		Double-conversion superheterodyne system
	Intermediate frequencies		1st: 31.65 MHz, 2nd: 455 kHz
RECEIVER	Sensitivity (typical)		0.5 µV at 12 dB SINAD		6 dBµV (emf) at 20 dB SINAD
	Adjacent channel selectivity (typical)		[Wide], [Middle]: 70 dB, [Narrow]: 60 dB
	Spurious response			70 dB
	Intermodulation (typical)			70 dB
	Audio output power		2.5 W typical at 10% distortion with a 4 Ω load
	Audio output impedance			4 Ω

All stated specifications are subject to change without notice or obligation.

1 - 1