Image IMTL41530 user manual HOW to USE Programs Directly from OUR WEB Site

HOW TO USE PROGRAMS DIRECTLY FROM

OUR WEB SITE

Our Web site at www.iFIT.com allows you to access programs directly from the internet. See www.iFIT.com for details. Note: Programs will control only the speed of your treadmill.

To use programs from our Web site, the treadmill must be connected to your home computer. See HOW TO CONNECT YOUR COMPUTER on page 16. In addition, you must have an internet connection and

an internet service provider. A list of specific system re- quirements is found on our Web site.

Follow the steps below to use a program from our

Web site.

1 Insert the key into the console.

See HOW TO TURN ON THE POWER on page 12.

2	Select the iFIT.com mode.
	When the key
	is inserted,
	the manual
	mode will be
	selected. To
	use a pro-
	gram from
	our Web site, press the large iFIT.	com button; the
	indicator on the button will light.
	Go to your computer and start an internet
3
	connection.
	Start your web browser, if necessary, and go to
4
	our Web site at www.iFIT.com.
	Follow the desired links on our Web site to se-
5
	lect a program.

Read and follow the on-line instructions for using a program.

Follow the on-line instructions to start the

6 program.

When you start the program, an on-screen count- down will begin.

7	Return	to the treadmill and stand on the foot
	rails.	Find the clip attached to the key and slide

the clip onto the waistband of your clothes.
When the on-screen countdown ends, the program
will start and the walking belt will begin to move.
Hold the handrails and begin walking. D		uring the
program, an electronic “chirping” sound will alert you
when the speed of the treadmill is about to change.
CAUTION:	Always listen for the “chirp” and be
prepared for speed	changes.

If the speed setting is too high or too low, you can manually override the setting by pressing the

Speed buttons on the console.However, when the next “chirp” is heard, the speed will

change to the next setting for the program.

To stop the walking belt, press the Stop button on
the console. The Time/Pace display will begin to
flash. To restart the program, press the Start but-
ton or the Speed	▲ button. After a moment, the
walking belt will begin to move at 1 mph.		When
the next “chirp” is heard, the speed will change
to the next setting for the program		.
When the program is completed, the walking belt
will stop and the Time/Pace display w		ill begin to
flash. Note: To use another program, press the
Stop button and go to step 5.

Note: If the speed of the treadmill does not change when a “chirp” is heard, make sure that the iFIT.com indicator is lit and that the Time/Pace display is not flashing. In addition, make sure that the audio cable is properly con- nected, that it is fully plugged in, and that it is not wrapped around a power cord.

Follow your progress with the matrix and the

8 displays.

See step 5 on page 12.

9 Whenkey. you are finished exercising, remove the

See step 8 on page 13.

19