JVC AV28CT1EP manual Press the blue button to start Auto Program function

PREPARATION

5Press the blue button to start the

AUTO PROGRAM function.

The AUTO PROGRAM menu appears and received TV channels are automatically registered in the Programme numbers (PR).

To cancel the AUTO PROGRAM function:

Press the b button.

6 After the TV channels have been registered in the Programme num- bers (PR), the EDIT menu appears.

You can proceed to edit the Programme numbers (PR) using the EDIT/MANUAL function. For details, see “ED- IT/MANUAL” on page 24.

When not using the EDIT/MANUAL function:

If you do not need to use the EDIT/MANUAL function, go to the next step.

7Press the a button to display the T-V LINK menu.

8Operate the T-V LINK menu accord- ing to the type of a VCR connected to the EXT-2 terminal.

When a T-V LINK compatible VCR is not con- nected:

Press the b button to exit the T-V LINK menu. The T-V LINK menu disappears.

When a T-V LINK compatible VCR is connected:

Follow the operating procedure “Downloading the data to VCR” on page 28 to transmit the Programme number (PR) data.

9Now, the initial settings are com- plete, and you can watch the TV.

Note:

•When your TV can detect the TV channel name from the TV channel broadcast signal, it automatically registers the TV channel name (ID) to the Pro- gramme number (PR) in which the TV channel has been registered.

•If a TV channel you want to view is not set to a Pro- gramme number (PR), manually set it using the MANUAL function. For details, see “EDIT/MANUAL” on page 24.

•The TV channel is not registered in Programme number PR 0 (AV). When you want to register a TV channel to PR 0 (AV), manually set it using the MAN- UAL function. For details, see “EDIT/MANUAL” on page 24.

4