JVC AV28CT1EP manual Dubbing, Press the 6 buttons to choose a name Then press the abutton

EXT SETTING

3Press the 6 buttons to choose a name.

Then press the abutton.

The LIST disappears and the name is assigned to the EXT terminal.

To erase a name assigned to the EXT terminal:

Choose a blank space.

4Press the abutton to complete the set- ting.

The menu disappears.

Note:

•You cannot assign an EXT terminal name not found in the name list (LIST).

■DUBBING

You can choose a signal source to be output from an EXT-2 terminal.

You can choose any one of the output signals of the device connected to the EXT terminal and the picture and sound from a TV channel you are currently viewing to output it to the EXT-2 terminal.

1Press the 5 buttons to choose the EXT-2 terminal.

2Press the 6 buttons to choose an EXT terminal or TV.

The arrow in the menu represents a signal flow. The left side of the arrow denotes a signal source output from the EXT-2 terminal.

EXT-1/EXT-3/EXT-4:

The output signal of the device connected to an EXT ter- minal passes through the TV and is output from the EXT- 2 terminal.

TV:

The picture and sound of the TV channel you are cur- rently viewing are output from the EXT-2 terminal.

3Press the abutton to complete the set- ting.

The menu disappears.

Note:

•During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 ter- minal.

•When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a de- vice connected to the EXT terminal onto a VCR con- nected to the EXT-2 terminal.

•The RGB signals from TV games cannot be out- put.Teletext programmes cannot be output.

20