JVC AV28CT1EP manual Insert, To cancel the ID function, When the Country setting is France

INSTALL

ID

1 Press the 6 buttons to choose a TV channel.

Every time you press the 6 buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) ap- pears on the screen.

Note:

•You can register your unique Channel name (ID) to the TV channel. When step 3 is completed, do not go to step 4, but press the 5buttons to move the cursor and the 6buttons to choose a character for completing the Channel name (ID). Then press the a button to register the Channel name (ID) to the TV channel.

2Press the red button to start the ID func- tion.

3Press the 6 buttons to choose the first character of a Channel name (ID) you want to attach to the TV channel.

4Press the blue button to display the ID LIST (channel name list).

5Press the 6 buttons to choose the Chan- nel name (ID).

To cancel the ID function:

Press the h(Information) button.

6Press the abutton to register a Channel name (ID) to a TV channel.

INSERT

Preparation:

•A CH/CC number unique to this TV and corresponding to the Channel number of a TV channel is required. Find the corresponding CH/CC number from a table “CH/CC NUMBER” on page 32. based on the Channel number of the TV channel.

•When the COUNTRY setting is not FRANCE, use a two-digit CH/CC number. When the COUNTRY setting is FRANCE, use a three-digit CH/CC number.

•Only when you add a TV channel (SECAM-L system) from a French station, be sure to set COUNTRY to FRANCE. If the COUNTRY setting is not FRANCE, follow the descrip- tion “Changing the COUNTRY setting” on page 28 to change the COUNTRY setting to FRANCE, then start the INSERT function.

1Press the 6 buttons to choose a Pro- gramme number (PR) for which you will register a new TV channel.

2Press the green button and start the IN- SERT function.

3Press the 6 buttons to choose “CC” or “CH” according to the CH/CC number of the TV channel.

When the COUNTRY setting is FRANCE:

Choose “CH1”, “CH2”, “CC1” or “CC2”.

To cancel the INSERT function:

Press the h(Information) button.

4Press the Number buttons to enter the re- maining CH/CC number.

The TV shifts to registration mode.

When the registration is completed, the picture of the TV channel appears on the screen.

Note:

•The CH/CC number is a number indicating the broadcast frequency to the TV. If the TV cannot de- tect the TV channel corresponding to the broadcast frequency indicated by the CH/CC number, a pic- ture in the no-signal state appears.

ENGLISH

25