JVC AV28CT1EP Adjust the volume, Watch images from external Devices, To return to a TV channel

BASIC OPERATION

2Press the 5 and 6 buttons to choose a Programme number (PR). Then press the abutton.

Note:

•For Programme numbers (PR) with the CHILD LOCK function set, the n(CHILD LOCK) mark is displayed next to the Programme number (PR) in the PR LIST.

•You cannot use the 6 buttons to choose a Pro- gramme number (PR) with the CHILD LOCK fun- tion set.

•Even if you try to choose a Programme number (PR) with the CHILD LOCK function set, the n (CHILD LOCK) mark will appear, and you cannot watch the TV channel. To watch the TV channel, see “CHILD LOCK” on page 21.

•If you do not have a clear picture or no colour ap- pears, change the colour system manually. See “COLOUR SYSTEM” on page 16.

Use the 6 buttons:

Press the 6 buttons to choose an EXT terminal.

Use the PR LIST:

1 Press the h (Information) button to dis- play the PR LIST.

2Press the 5and 6buttons to choose an EXT terminal. Then press the abutton.

Note:

•The EXT terminals are registered after the Pro- gramme number PR 99.

•You can choose a video input signal from the S-VID-

EO signal (Y/C signal) and regular video signal (composite signal). For details, see “y(S-VIDEO input)” on page 19.

•If you do not have a clear picture or no colour ap- pears, change the colour system manually. See “COLOUR SYSTEM” on page 16.

•When choosing an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen.

ENGLISH

■Adjust the volume

Press the 5 buttons to adjust the vol- ume.

The Volume indicator appears and the volume changes as you press the –/+buttons.

•This TV set has a function which can automatically change over the input according to a special signal output from an external device.(The EXT-4 terminal does not support it.)

To return to a TV channel:

Press the bbutton, the 6buttons or the Number but- tons.

■Watch images from external

devices

Choose an EXT terminal to which the desired external device has been connected.

Use the obutton:

Press the o button to choose an EXT terminal. Pressing the o button changes the choice as follows:

To use the Programme number PR 0 (AV):

When the TV and VCR are connected only by the Aerial cable, choosing the Programme number PR 0 (AV) al- lows you to view images from the VCR. Set the VCR RF channel to the Programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page 24.

Pressing the o button changes the choice as fol- lows:

TV mode EXT modes

TV mode

Programme

numbers

PR 1 – PR 99

EXT modes

EXT-1	EXT-2
EXT-4	EXT-3

Programme	PR 0
numbers
PR 1 – PR 99

EXT-1	EXT-2
EXT-4	EXT-3

Note:

•The VCR RF channel is sent as the RF signal from the VCR.

•Also refer to your VCR instruction manual.

7