JVC AV28CT1EP manual Install, Language, Auto Program, Details, see EDIT/MANUAL on

INSTALL

To display the INSTALL menu:

1 Press the a button to display MENU (main menu).

2Press the 6 button to choose the IN- STALL menu. Then press the abutton.

■LANGUAGE

You can choose the language you want to use for the on- screen display from the language list in a menu.

1Press the 6 buttons to choose LAN- GUAGE. Then press the abutton.

A sub-menu of the LANGUAGE function appears.

2Press the 6 buttons to choose a lan- guage.

3Press the abutton to complete the set- ting.

The menu disappears.

■AUTO PROGRAM

You can automatically register the TV channels which can be received well at your residence in the TV’s Programme num- bers (PR) by performing the following.

1Press the 6 buttons to choose AUTO PROGRAM. Then press the abutton.

The COUNTRY menu appears as a sub-menu of the AUTO PROGRAM function.

2Press the 5 and ∞/5buttons to choose the country where you are now located.

3 Press the blue button to start the AUTO PROGRAM function.

The AUTO PROGRAM menu appears and received TV channels are automatically registered in the Programme numbers (PR).

ENGLISH

To cancel the AUTO PROGRAM function:

Press the b button.

4After the TV channels have been regis- tered in the Programme numbers (PR), the EDIT menu appears.

You can proceed to edit the Programme numbers (PR) using the EDIT/MANUAL function. For details, see “ED- IT/MANUAL” on page 24.

When not using the EDIT/MANUAL function:

If you do not need to use the EDIT/MANUAL function, go to the next step.

5Press the abutton to display the T-V LINK menu.

6Operate the T-V LINK menu according to the type of VCR connected to the EXT-2 terminal.

When a T-V LINK compatible VCR is not con- nected:

Press the b button to exit the T-V LINK menu.

The T-V LINK menu disappears, and all the settings are completed.

When a T-V LINK compatible VCR is connected:

Follow the operating procedure “Downloading the data to VCR” on page 28 to transmit the Programme number (PR) data to the VCR.

Note:

•When your TV can detect the TV channel name from the TV channel broadcast signal, it automatically registers the TV channel name (ID) to the Pro- gramme number (PR) in which the TV channel has been registered.

•If a TV channel you want to view is not set to a Pro- gramme number (PR), manually set it using the MANUAL function. For details, see “EDIT/MANUAL” on page 24.

•The TV channel is not registered in Programme number PR 0 (AV). When you want to register a TV channel to PR

0 (AV) manually set it using the MANUAL function. For
details, see “EDIT/MANUAL” on page 24.	23