PICTURE FEATURES
To display the PICTURE FEATURES menu:
1 Press the a button to display MENU (main menu).
2Press the 6 button to choose PICTURE
FEATURES, and press the abutton.
■AUTO VNR
The AUTO VNR function optimally reduces noise of the TV automatically according to the noise of the current picture. The function also adjusts the optimum Sharpness (SHARP).
1 Press the 6 buttons to choose AUTO
VNR.
2Press the 5 buttons to choose AUTO.
MIN:
The AUTO VNR function is cancelled. When you set the mode to AUTO but feel that the sharpness of the original picture has not be reproduced fully, change the mode to MIN. However, a noise remaining in the original picture may be emphasized.
MAX:
This mode always maximizes the noise reduction effect irrespective of state of the picture. When you set the mode to AUTO but feel that the noise is remarkable, change the mode to MAX. However, this may reduce the sharpness of the picture.
3Press the abutton to complete the set- ting.
The menu disappears.
■COLOUR SYSTEM
The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
1Press the 6 buttons to choose COLOUR
SYSTEM. Then press the abutton.
The
2Press the 5 buttons to choose the ap- propriate colour system.
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input sig- nal. Only when you are viewing a picture from Pro- gramme number PR 0 (AV), or EXT terminal, you can choose using the AUTO function.
3Press the abutton to complete the set- ting.
The menu disappears.
Note:
•The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.
•When in the Programme numbers PR 0 (AV) to PR 99, you cannot choose NTSC 3.58 or NTSC 4.43.
16
