EonStor A16E-G2130-4 Installation and Hardware Reference Manual

WARNING!

All drive trays must be installed into the enclosure even if they do not contain a hard drive. If the trays are not installed into the enclosure, the ventilation airflow will not be normalized and the subsystem will overheat.

Step 1. Make sure the rotary bezel lock is in the unlocked position, i.e., the groove on its face is in a horizontal orientation. If the groove is in a vertical position, as shown in Figure 2-6,then the bezel lock is locked and the front flap on the drive tray cannot be opened.

Figure 2-6: Front View of an Individual Drive Tray

Step 2. Open the front flap on the drive tray. (See Figure 2-7) Push the release button on the drive tray. The front flap will spring open.

Figure 2-7: Drive Tray Release Button

Step 3. Align the drive tray with the slot in which you wish to insert it making sure that it is properly aligned within the drive bay. Gently slide it in until the drive tray reach the end of drive bay. This should be done smoothly and gently. (See Figure 2-8)

2-12

Drive Tray Installation