Infortrend A16E-G2130-4 Remove the controller module, Insert the replacement module into the DIMM socket, Step 5. Gently pull the DIMM module out of the DIMM socket

EonStor A16E-G2130-4 Installation and Hardware Reference Manual

Step 1. Prepare an anti-static work pad or container for placing a removed module. Use of an ESD grounding strap is highly recommended.

Step 2. Remove the BBU module, if installed. Carefully place the module for it contains Li-ion batteries. Do not drop it to the floor or place it near any heat source or fire.

Step 3. Remove the controller module. See Section 5.2.3.

Step 4. Remove the previously installed DIMM module from the DIMM socket. To do this, push the white module clips on either side of the DIMM socket down. By doing this, the previously installed modules will be ejected from the DIMM socket. (See Figure 5-4)

Figure 5-4: Removing a DIMM Module

Step 5. Gently pull the DIMM module out of the DIMM socket.

Step 6. Insert the replacement module into the DIMM socket. Make sure the white clips of the DIMM socket are in the open positions. Align the DIMM module with the DIMM socket by checking its “keyed” position. Once aligned, gently and firmly push the DIMM module into the socket. The white clips on the sides of the socket will close automatically and secure the DIMM module into the socket.

5-8 Replacing or Upgrading Memory Modules