Chapter 5: Subsystem Maintenance and Upgrading

Figure 5-15: Front View of an Individual Drive Tray

Step 3. Open the front flap on the drive tray. Push the release button on the front of the drive tray. The front flap will automatically swings up into position.

Figure 5-16: Opening the Drive Tray Front Flap

Step 4. Remove the drive tray by pulling it one inch away from the drive bay. Wait for at least 30 seconds for the disk drive to spin down (if the disk drive is removed for a different purpose, e.g., cloning the members of a logical drive or Copy & Replace), and then gently and carefully withdraw the drive tray from the chassis.

Replacing a Failed Hard Drive

5-21