EonStor A16E-G2130-4 Installation and Hardware Reference Manual

How to use the button?

After the subsystem is powered down, you can use a straighten paper-clip to press the button. Press and hold down the button, power on the subsystem, and wait for the LED to light up to indicate system defaults have already been restored.

3.2.4 Ethernet Port LEDs

Four (4) GbE host ports, which provide different connection speeds, are located on the controller faceplate. Shielded or non-shielded, Cat5e straight- through Ethernet cables can be used to connect the RJ-45 ports to the network. Two (2) LEDs located on each Ethernet port indicate the Ethernet connection speed and link status. See the diagram below for the locations of the two (2) LED indicators. Refer to Table 3-5for the LED definitions.

Figure 3-3: GbE LAN Indicators

 

Name

 

 

Color

 

 

Status

 

 

 

 

 

 

 

 

 

 

 

Speed

 

 

Green

 

 

ON indicates currently connected with GbE

 

 

 

 

 

 

speed, OFF means connected with 10/100

 

 

 

 

 

 

 

 

speed.

 

 

LAN Activity

 

 

Green

 

 

ON for linked.

 

 

 

 

 

 

BLINKING indicates active transmission.

 

 

 

 

 

 

 

 

 

 

 

Table 3-4: GbE LAN Port LED Definitions

 

Figure 3-4: 10/100BaseT Management Port Indicators

 

Name

 

 

Color

 

 

Status

 

 

 

 

 

 

 

 

 

 

 

Link Status

 

 

Green

 

 

ON indicates currently connected to a

 

 

 

 

 

 

LAN.

 

 

 

 

 

 

 

 

 

 

LAN Activity

 

 

Green

 

 

BLINKING indicates active transmission.

 

 

 

 

 

 

 

 

 

 

Table 3-5: 10/100BaseT Management Port LED Definitions

3-6

Status-indicating LEDs