Infortrend A16E-G2130-4 Appendix C, Pinouts, C.1. D-SUB9 and Audio Jack Pinouts, Pin Name, Pin Name, COM1 Cable:, CN1 Pin Number, CN2 Pin Number, C.1.1 COM1 Serial Port Cable

Appendix C

Pinouts

C.1. D-SUB 9 and Audio Jack PinoutsC.1.1 COM1 Serial Port Cable

COM1 Cable: This cable connects between COM1 serial port on the controller module to the serial port of a management computer. The serial port’s defaults and requirements are:

1.Set at 38400 baud, 8 bit, 1 stop bit, and no parity.

2.In most cases, connecting RD, TD, and SG is enough to establish communications with a terminal.

PN: IFT-9270ASCab

Figure C-1: Adapter Cable for COM1 - Connector Pinouts

CN1 Pin Number	Pin Name
1	Ground
2	TXD
3	RXD

CN2 Pin Number	Pin Name
1	NC
2	RXD
3	TXD
4	DTR (Shorted)
5	GND

C-1