4Press the CH 
or 
button or the number buttons to select a TV channel.
If you use the number buttons to select a TV channel:
•Press 0 and a number button for a
•Press the number buttons for a
•Press the +10/+100 button, then press the last two channel numbers for a
5Press the VOL. 
or 
button to adjust the volume.
Note If you turn off your DVD combo in DVD mode, when you turn it back on, your DVD combo will be in TV/VCR mode.
Watching TV from a cable box or satellite box
To watch TV from a cable box or satellite box:
1Use your DVD combo’s controls to set the channel to the cable or satellite access channel (usually channel 3 or 4).
2Use the cable or satellite box to tune to a TV channel.
Watching TV from an external input device
To watch TV from an external input device:
•If your DVD combo is connected an external TV through your DVD combo’s front audio and video jacks, press the INPUT or CH 
or 
button until AUX appears on the screen.
Setting up channels
When you first set up your DVD combo, you need to set up the channels available in your area.
To set up channels:
1Press the SETUP button.
2Press the 
or 
button to select CHANNEL SET UP, then press the ENTER button.
3Press the 
or 
button to select AUTO PRESET CH (TV) or AUTO PRESET CH (CATV), then press the ENTER button. Your DVD combo scans for and stores available TV or CATV channel numbers in your area. When the scanning is complete, the lowest channel number found appears on the display.
Note If NO TV SIGNALS appears on the screen, make sure that your antenna is connected correctly and securely, then scan again.
You do not need to set up channels if you are connected to a cable or satellite box. Instead, use your DVD combo’s controls to set the channel to the cable or satellite access channel (usually channel 3 or 4). Then use the cable or satellite box to tune to a TV channel.
18www.insignia-products.com