Location
For safe operation and satisfactory performance of your DVD combo, keep the following in mind when selecting a place for its installation:
•Shield your DVD combo from direct sunlight and keep it away from sources of intense heat.
•Avoid dusty or humid places.
•Avoid places with insufficient ventilation for correct heat dissipation. Do not block the ventilation holes at the top and bottom of your DVD combo. Do not place your DVD combo on a carpet or other soft surface because this will block the ventilation holes.
•Install your DVD combo in a horizontal position.
•Avoid locations subject to strong vibration.
•Do not place your DVD combo near strong magnetic fields.
•Avoid moving your DVD combo to locations where temperature differences are extreme.
•Make sure that you remove the disc and unplug the AC power cord from the outlet before moving your DVD combo.
Avoiding electrical shock and fire hazards
•Do not handle the power cord with wet hands.
•Do not pull on the power cord when disconnecting it from an AC power outlet. Grasp the cord by the plug.
•If water is spilled on your DVD combo, unplug the power cord immediately and consult qualified service personnel.
•Do not put your fingers or objects into the disc loading tray.
•Do not place anything directly on top of your DVD combo.
Moisture
Condensation may occur inside your DVD combo when you move it from a cold place to a warm place, after heating a cold room, or under conditions of high humidity. If you play a videotape or DVD when your DVD combo has condensation, the moisture may damage the videotape, disc, or your DVD combo. When condensation occurs inside your DVD combo, turn on your DVD combo and leave it on for at least two hours to dry out before inserting a videotape or disc.
Recycling
Do not throw away or incinerate batteries. Dispose of batteries in accordance with your local regulations concerning chemical wastes.
2www.insignia-products.com