4Press the REC button, then press the 
or 
button to select the program you want to adjust.
5Press the REC button one or more times to select the new beginning and ending time you want. Each time you press the button, the time changes by 10 minutes. If the recording is in progress, only the ending time changes.
6Press the ENTER button to confirm the setting, then press the SETUP button to close the menu.
Note If you want to cancel your changes and return to the original start and end times, press the 
button.
Finding a program on a recorded videotape
After a timer recording finishes, you can search the beginning of the recorded program(s).
To find a program:
1Press the SETUP button.
2Press the 
or 
button to select USER’S SET UP, then press the ENTER button.
3Press the 
or 
button to select AUTO RETURN, then press the ENTER button to select ON.
When all the timer recordings are complete, your DVD combo rewinds to the beginning of the recorded program(s) and turns itself off.
To cancel AUTO RETURN function:
1Press the SETUP button.
2Press the 
or 
button to select USER’S SET UP, then press the ENTER button.
3Press the 
or 
button to select AUTO RETURN, then press the ENTER button to select OFF.
Tip Your DVD combo stores the setting for this function even if a power failure occurs.
Auto rewind and eject feature
When your DVD combo reaches the end of a videotape, it automatically rewinds and ejects the tape. This feature is active when REPEAT PLAY is set to OFF. This feature is not active during timer recordings of OTRs.
34www.insignia-products.com