Adding or deleting channels
You can add channels that were not set up when you scanned for channels, or you can delete channels that are no longer available or that you do not want to be available.
To add or delete channels:
1Press the SETUP button.
2Press the 
or 
button to select CHANNEL SET UP, then press the ENTER button.
3Press the 
or 
button to select ADD/DELETE CH, then press the ENTER button.
4Press the CH 
or 
button or the number buttons to select a TV channel you want to add or delete.
5Press the ENTER button one or more times to select add or delete. The channel number changes to red (delete) or blue (add) each time you press the ENTER button.
6Press the SETUP button.
Manually setting the clock
You need to set the clock if you want to use your DVD combo to make timed recordings with the VCR.
The first time you set the clock, we recommend that you set it manually, then turn on the AUTO CLOCK setting to update the clock periodically.
Note You must use the remote control to set the clock.
To manually set the clock:
1Press the SETUP button.
2Press the 
or 
button to select SETTING CLOCK, then press the ENTER button.
3If there is no PBS station in your area or through your cable TV provider, press the 
or 
button to select AUTO CLOCK, then press the ENTER button to turn off the auto clock setting.
4Press the 
or 
button to select MANUAL CLOCK SET, then press the ENTER button.
5Press the 
or 
button to select the month, day, year, hour, and minute. After you set the first item, press the 
or 
button to move to the next item.
6Press the SETUP button to start the clock.
Note If you unplug your DVD combo or the power fails for more than three seconds, you may have to reset the clock.