To set up a future recording:
1Press the SETUP button.
2Press the 
or 
button to select TIMER PROGRAMMING, then press the ENTER button.
If you have not set the clock, the MANUAL CLOCK SET menu appears. Follow the instructions in “Manually setting the clock” on page 19, then start this task again.
3Press the 
or 
button to select the row you want to use, then press the 
button.
4Press the 
or 
button one or more times to select the channel you want to record, then press the 
button.
If you are using a cable or satellite TV box, tune your DVD combo to the access channel (usually 3 or 4), then use the cable or satellite TV box to tune to the channel you want to record.
5Press the 
or 
to select the date for the recording, then press the 
button.
•For a
•For a weekly recording, select EVRY and the day of the week.
•For a daily recording, select EVRY DAY.
6Press the 
or 
button to select beginning and ending hours and minutes. Press the 
button to move from field to field.
7Press the 
or 
button to select the tape speed. For more information, see “Recording tips” on page 29.
8Press the ENTER button.
9To set up additional recordings, repeat Steps 3 through 8.
10When you finish setting up recordings, press the SETUP button.
11Insert a videotape that has an
12Press the POWER button to complete the setup. The recording indicator lights. If the videotape does not have a tab, your DVD combo ejects the tape and turns off.
Notes You must turn off your DVD combo to activate the future recording feature. If the power is not turned off and you are watching TV, TIMER REC STANDBY starts flashing on the screen two minutes before the recording start time.
When the recording starts, the TV screen does not turn on.
During the recording, you can only watch the TV program being recorded or DVD playback.
If the tape runs out before the end of the recording time, your DVD combo stops recording and ejects the tape.
32www.insignia-products.com