Insignia NS-42LCD 42-inch LCD TV

Changing the on-screen menu language

AUX Code: ___________________

 

You can change the language that the on-screen

CBL Code: ___________________

 

CD Code: ____________________

 

menu displays.

 

To change the on-screen menu language:

DVD Code: ___________________

 

SAT Code: ___________________

 

1 Press MENU, then press or to display the

 

TNR Code:___________________

 

 

SYSTEM SETUP menu page.

 

 

VCR Code:___________________

 

 

 

 

 

 

 

2Press to enter the System Setup menu.

3Press or to select Language, then press or to select the language you want.

4Press EXIT to return to TV viewing.

Programming your remote control

The remote control can control four devices, such as a VCR, DVD player, cable or satellite receiver, amplifier or tuner, or similar device.

To program the remote control:

1Find the code for the device you want to program. (See “Device codes” on page 17.) If more than one code is listed for a device, write down all of the codes.

2Turn on the device you want to program, and load any media if required (for example, a DVD).

3Press a device key on the remote control.

Use DVD for DVD players or VCRs.

Use CBL for cable or satellite set-top boxes.

Use AUX for any other device.

4Press and hold the SET button on the remote control until the LED blinks twice, then release the button.

5Enter the first five-digit code for your device. The LED blinks once as each digit is entered. If the code is correct, the LED blinks twice.

Note

If the LED does not blink twice, repeat Steps 3 through 5 using a different code.

6Aim the remote control at the device, then

press the button.The device should turn off.

Note

If the device does not turn off, repeat steps 4 through 6 using a different code. If you cannot find a code that works, see “Searching for your code” on page 16.

8Press the SET button to save the code and exit.

Searching for your code

If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try searching for your code.

To search for a code:

1Press a device key.

2Press and hold the SET button until the LED blinks twice, the release the button.

3Enter 991, then the device group number (0=cable, 1=TV, 2=VCR, 3=audio). The LED blinks twice.

4Aim the remote control at the device, then

press the button. The remote sends codes from its library to the selected device, starting with the most common code first. If the device responds, go to Step 7.

5If the device does not respond, press the CH+ button. Your remote control will try the next code. Keep pressing the CH+ button until the device responds. You can press the CH– button to try a previous code. Continue until the device responds.

6To search for a code for another device, repeat steps 1 through 5.

7Press the SET button to save the code and exit.

Checking the codes

If you programmed a device by searching for a code, you may want to know what four-digit code the remote is using.

To check the code:

1Press the device button on the remote control.

2Press and hold the SET button until the LED blinks twice, then release the button.

3Enter 990. The LED blinks twice.

4Press 1 and count the LED blinks. This is the first digit of the code. For example, if the LED blinks twice, the first digit is 2. If the LED does not blink, the first digit is 0.

5Repeat step 4 using 2 for the second digit, 3 for the third digit, 4 for the fourth digit, and 5 for the fifth digit.

6Press the SET button to exit.

7Repeat Steps 1 through 6 to program additional devices. For future reference, write down each working device code below:

16

www.insignia-products.com