
Insignia
2While a picture is the focus window, you can apply many operations to it such as channel select, volume control, and input source select.
3In POP mode, you can press OK to select the three mini windows as a focus window. “1,2,3” appears on the screen. Before the
Note
Normally the main picture is the default focus window. Many (but not all) operations can be applied to the focus window.
Using the electronic program guide
Your TV has an electronic program guide to help you navigate through viewing options. The electronic program guide (EPG) supplies program information, such as program lists for channels and times for available programs. Sometimes detailed program information is also available on the EPG. (The availability and the amount of program details vary. depending on the broadcaster.)
Notes
•The EPG works only with digital channels.
•To enable the EPG to work correctly, you must set the Auto Clock to ON.
To display the electronic program guide:
1Press the GUIDE button. The EPG appears. (Example shown below.)
E
A
B
C
D
Item | Description |
|
|
A | Shows current time, date, current program’s |
| station and rating, and more. |
|
|
B | Displays additional and detailed information |
| about a particular program. (The availability |
| of additional details depends on the |
| broadcaster.) |
|
|
C | Displays all available |
| ATSC channel. |
|
|
D | Displays the currently selected |
| information, such as the program list, and |
| start and end times of all available programs. |
|
|
E | Displays a preview of the currently selected |
|
3Press OK to move the focus to different windows. After a window is active, a green border appears around it and you can apply operations to it.
4If the bottom half of the EPG is active, press or
to select the channel you want. (After the channel is selected, its relevant program information is displayed).
5Press or
to select a different program at this channel. (After the program is selected, the top left window displays detailed program information, if available.)
6If additional and detailed information about the selected program appears in the top left
window, you can press OK to highlight it (a green border appears around it), then press or
to scroll the page (if required) to view more information.
7All available sub channels within an ATSC channel will be displayed.
Adjusting the image
Adjusting the image for PC/Component mode
Before adjusting the image, make sure that you select the correct source (Analog RGB or Component).
To adjust the image for PC/Component mode:
1Press MENU, then press or
to display the IMAGE ADJUST menu page.
2Press to enter the menu.
Menu in Component mode
Menu in PC mode
2To exit, press GUIDE again.
36 |