Insignia
PBP | Swapping the PIP/PBP picture |
PBP mode splits the screen into two, allowing two pictures to be shown on the TV screen at the same time. Each picture is given half the screen.
To swap the PIP/PBP picture:
1Press the SWAP button.
Note
The main picture source can be any video type except HDMI, but the
POP
You can use POP to scan the programs of all memorized channels on the three
Note
The main picture source can be any video type except HDMI, but the
Note
The SWAP button works only when the main picture displays an analog TV channel or A/V program.
Selecting the PIP
To select the PIP
1In PIP mode, press the P.POSITION button to cycle through the available
Selecting the focus window
While in a
To change the focus window:
1Press OK. The focus changes from the main picture to any of the
35 |