Insignia NS-42 Maintaining

Insignia NS-42LCD 42-inch LCD TV

	3 Within the menu, press		or	to select an		Setting	Description
	option, then press or		to adjust the setting.
						Freeze Image	Select ON to freeze the image on the
	Setting	Description					screen. Select OFF to reactivate the image.
							You can press FREEZE on the remote
	Image size	Selects a desired image size (aspect ratio).					control to freeze the image, and press
		The choice may be different in different					again to restore.
		mode. (see “Adjusting the image” on				Colorspace	When the TV converts a DVI signal to a
		page 27 for more information.)					HDMI signal, sometimes abnormal color
		You can press ZOOM on the remote control					appears. If this situation occurs, you can
		to select the aspect ratio.					try to adjust this item.
	H position	Moves the image on the screen left/right.				4 Press	EXIT to exit.
	V position	Moves the image on the screen up/down.			Maintaining
	Frequency	Adjusts the sample frequency.
	Phase	Improves the focusing of a stable image.			LCD display panel information
	Freeze Image	Select ON to freeze the image on the				Markings or a retained image on the LCD panel,
		screen. Select OFF to reactivate the image.
						resulting from a fixed image being displayed for
		You can press FREEZE on the remote
						long periods of time, is not an operating defect
		control to freeze the image, and press
						and as such is not covered by the warranty. This
		again to restore.
						product is not designed to display fixed-image
	H width	Adjusts the horizontal width of the image.
						patterns for extended periods of time.
	(component				Important information regarding the use of video
	mode only)
					games, computers, captions, or other fixed-image
	V width	Adjusts the vertical width of the image.
					displays
	(component
						The extended use of fixed-image program
	mode only)
						material can cause a permanent “shadow
	Auto Adjust	Highlight Auto Adjust, then press or to
						image” on the LCD panel.
	(PC mode only)
		start auto adjustment. The TV automatically				This background image is viewable on normal
		adjusts the image settings, such as
						programs in the form of a stationary fixed image.
		frequency and position.
						This type of irreversible LCD panel deterioration
	4 Press EXIT to exit.
						can be limited by observing the following steps:
Adjusting the image for HDMI mode						• Reduce the brightness/contrast setting to a
						minimum viewing level.

Select the HDMI source before adjusting the	• Do not display the fixed image for extended
image.
	periods of time.

To adjust the image for HDMI mode:

1Press MENU, then press or to display the IMAGE ADJUST menu page.

2Press to enter the menu.

3Within the menu, press or to select an option, then press or to adjust the setting.

Setting	Description
Image size	Selects a desired image size (aspect ratio).
	(See “Adjusting the image” on page 27 for
	more information.)
	You can press ZOOM on the remote control
	to select. When a 1080i or 1080p signal is
	received, this cannot be adjusted.

•Turn the power off when not in actual use.

Cleaning and maintenance

To clean this TV, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.

•Use eyeglass cleaner to remove stubborn dirt from the LCD.

•Never use alcohol, paint thinner, or benzine to clean this TV.

•Before using a chemically treated cloth, read the instructions that came with the cloth carefully.

Care of remote control

•Keep the remote dry. If it gets wet, wipe it dry immediately.

•Use and store the remote control only in normal temperature environments.

•Handle the remote control gently and carefully. Don’t drop it.

•Wipe the remote control with a damp cloth to keep it looking like new.

www.insignia-products.com 37