Integra DPS-6.7 Operation Setting Menu, Setting the Parental Lock, Change the Security Code

DPS-6.7_En.book Page 53 Monday, July 31, 2006 3:12 PM

Configuring the DVD player—Continued

Operation Setting Menu

Setting the Parental Lock

With the Parental Lock function you can block access to certain scenes that the authors have flagged as being unsuitable for children.

1	Select “Operation Setting” menu
	in the setup.
2	Use the Up/Down [ ]/[ ] buttons
Remote	to select “Parental Lock,” and
	then press the [Enter] button.
controller
	The security code input screen appears.

Change the Security Code

To change the Security Code, confirm your existing code then enter a new one.

1	Select “Operation Setting” menu
	in the setup.
2	Use the Up/Down [ ]/[ ] buttons
Remote	to select “Security Code,” and
	then press the [Enter] button.
controller
	The security code input screen appears.

3	Enter the security code using the
Remote	remote controller’s number but-
	tons, and then press the [Enter]
controller
	button.
	The default security code is “8888.”
	You can change the security code in the
	next section.

3

Remote

controller

Enter the existing security code using the remote controller’s number buttons, and then press the [Enter] button.

The default security code is “8888.” Even if a new security code has been entered, the code “8888” can still be used.

Once the security code has been entered, the new security code input screen appears.

4	Use the Up/Down [ ]/[ ] buttons
Remote	to change the level of parental
	lock, and then press the [Enter]
controller
	button.
	At level 8 parental lock is off, with level
	1 being the strictest level.

Notes:

•When entering a security code, you can use the [CLR] button to delete the numbers entered so far, if neces- sary.

•Not all discs use parental lock. See the disc’s sleeve notes for details.

•Discs with parental lock may cut certain scenes, replace certain scenes with children-friendly scenes, or prevent playback of the entire disc.

4	Enter the new security code
Remote	using the remote controller’s
	number buttons, and then press
controller
	the [Enter] button.
	The new security code has been set.

Note:

•If you forget your security code, enter “8888” instead. “8888” is a security code that can always be used.

53