Integra DTR-8.8 instruction manual 104, Speaker Distance

Advanced Setup—Continued

Speaker Distance

These settings are set automatically by the Automatic Speaker Setup function (see page 55).

With the Speaker Distance settings, you can specify the distance from each speaker to the listening position.

1	Press the [Receiver] Remote
	Mode button, followed by the
Receiver	[Setup] button.
	The main menu appears onscreen.

4

Enter

Enter

Use the Up and Down [ ]/[ ] buttons to select “Unit,” and then use the Left and Right [ ]/[ ] buttons to select:

feet: Select if you want to enter distances in feet. Can be set from 0.2 to 30 feet in 0.2-foot steps.

meters: Select if you want to enter distances in meters. Can be set from 0.06 to 9 meters in 0.06-meter steps.

S

et

u

p

5

Enter

Use the Up and Down [ ]/[ ] buttons to select a speaker, and use the Left and Right [ ]/[ ] buttons to specify the distance.

2

Enter

Enter

Use the Up and Down []/[ ] buttons to select “2. Speaker Setup,” and then press [Enter].

The Speaker Setup menu appears.

2.Speaker Setup

1.Speaker Settings

2.Speaker Config 3.Speaker Distance 4.Level Calibration 5.Equalizer Settings 6.THX Audio Setup

Enter

Specify the distance from the speaker to your listening position.

Notes:

• The Center distance cannot be set if

Speaker Type is set to BTL (page 47)

or Center is set to None in the

Speaker Configuration (page 101).

• The Surr Right and Surr Left dis-

tances cannot be set if Speaker Type

is set to BTL (page 47) or Surround

is set to None in the Speaker Config-

uration (page 101).

3

Enter

Enter

Use the Up and Down []/[ ] buttons to select “3. Speaker Dis- tance,” and then press [Enter].

The Speaker Distance screen appears.

2-3.Speaker Distance

Unit	feet
Left	12.0ft
Center	12.0ft
Right	12.0ft
Surr Right	12.0ft
Surr Back R	12.0ft
Surr Back L	12.0ft
Surr Left	12.0ft
Subwoofer	12.0ft

Note:

•Speakers that you set to No or None in the Speaker Configuration (page 101) cannot be selected.

•	The Surr Back R and Surr Back L
	distances cannot be set if Speaker
	Type is set to Bi-Amp or BTL
	(page 47), Surr Back is set to None in
	the Speaker Configuration
	(page 101), or Powered Zone 2 is
	being used (page 126).
•	The Subwoofer distance cannot be
	set if Subwoofer is set to No (step 4).

6	Repeat step 5 for each speaker.
7	Press the [Setup] button.
	Setup closes.
	S
	et
	u
	p

Note:

•This procedure can also be performed on the AV receiver by using its [Setup], [Enter], and arrow but-

tons.

104