Integra DTR-8.8 instruction manual Listening to the Radio, Listening to AM/FM Stations

Listening to the Radio

Listening to AM/FM Stations

Tuning Mode

Tuning

Tuner

With the built-in tuner, you can enjoy AM and FM radio stations and store your favorite stations as presets for easy selection.

Use the [Tuner] input selector button to select AM or FM.

In this example, FM has been selected.

Band Frequency

(Actual display depends on country.)

Tuning into AM/FM Radio Stations

■ Auto Tuning Mode

1	Press the [Tuning Mode] button
	so that the AUTO indicator
	appears on the display.
2	Press the Tuning Up or Down
	[ ]/[ ] button.
	Searching stops when a station is
	found.

When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM STEREO indicator also appears. (The FM STEREO indicator will not appear on models that have HD Radio.)

TUNED

AUTO

FM STEREO

■ Manual Tuning Mode

1	Press the [Tuning Mode] button
	so that the AUTO indicator disap-
	pears from the display.
2	Press and hold the Tuning Up or
	Down [ ]/[ ] button.
	The frequency stops changing when
	you release the button.
	Press the button repeatedly to change
	the frequency one step at a time.

The North American model changes FM frequency in

0.2MHz steps, 10 kHz steps for AM. For other models it’s 0.05 MHz steps for FM and 9 kHz steps for AM. In Manual Tuning mode, FM stations will be in mono.

Tuning into Weak FM Stereo Stations

If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.

63