Integra DTR-8.8 136, Using Macros, Making Macros, Running Macros, Deleting Macros

Controlling Other Components—Continued

Using Macros

You can program the remote controller’s Macro buttons to perform a sequence of remote control actions.

Example:

To play a CD you typically need to perform the follow- ing actions:

1.Press the [Receiver] Remote Mode button to select the Receiver remote controller mode.

2.Press the [On] button to turn on the AV receiver.

3.Press the [CD] Input Selector button to select the CD input source.

4.Press the [CD] Remote Mode button to select the CD remote controller mode.

5. Press the Play [ ] button to start playback on the CD player.

You can program a Macro button so that all five actions are performed with just one button press.

2			Press the buttons whose actions
			you want to program into the
			macro in the order you want them
			performed.
			For the CD example in the left column,
			you’d press the following buttons:
			[ON], [CD] Input Selector, [CD]
			Remote Mode, Play [ ].
3			When you’ve finished, press the
	Macro		Macro button again.
1	2	3	The Remote indicator flashes twice.

If you enter eight commands, the pro- cess will finish automatically.

Note:

•If any of the buttons you used to make a macro are taught new commands, the macro will no longer work properly and will have to be made again.

Making Macros

Each Macro button can store one macro, and each macro can contain up to eight commands.

					Remote
					indicator
	On	Standby	TV
				Input
	DVD	VCR/DVR	CBL/SAT
	1	2	3	+
	Game/TV	AUX 1	AUX 2	TV CH
	4	5	6	-
	Tape	Tuner	CD
	7	8	9
	Phono	Net/USB	D.TUN	TV VOL
Macro	+10	0	Clear
	--/---10 11 12
		Input Selector
1, 2, 3		Macro
	1	2	3	Zone3
		Remote Mode
Remote	DVD	VCR	CD	Zone2
			CDR/MD/Dock
					Receiver
Mode	TV	Cable	Net/USB	Receiver
		SAT		Tape/AMP
	Dimmer			Sleep
		nu	Me
		Me
		op	nu
		T
	+
	CH	Enter		VOL
	Disc
	Album

Running Macros

	Macro		Press the Macro [1], [2], or [3]
1	2	3	button.

The commands in the macro are trans- mitted in the order in which they were programmed. Keep the remote control- ler pointed at the AV receiver until all of the commands have been transmit- ted.

Macros can be run at any time, regard- less of the current remote controller mode.

Deleting Macros

1		While holding down the Remote
		Mode button of the remote con-
Remote Mode
DVD	VCR	troller mode you want to use at
CD	TV	the start of the macro, press
CDR/MD/Dock		Macro button [1], [2], or [3].
Cable	Net/USB	The Remote indicator lights up.
SAT
Receiver
Tape/AMP		For the CD example in the left column,
		you’d press and hold the [Receiver]

1

Receiver

Macro

1 2 3

While holding down the [Receiver] Remote Mode button, press the Macro button whose macro you want to delete.

	Macro		Remote Mode button, and then press
			Macro button [1], [2], or [3].
1	2	3

2		Press the Macro button again.
	Macro
1	2	3

136