Integra DTR-8.8 instruction manual XM Radio Messages

Listening to the Radio—Continued

3		Use the Up and Down [ ]/[ ]
		buttons to select “4. Satellite
	Enter	Radio,” and then press [Enter].
		The Satellite Radio screen appears.
		The name of the currently selected
		input selector is displayed in a box.
	Enter
4		Position the XM Mini-Tuner
		Antenna so that as many bars as
		possible (up to 3) appear on the
		XM Satellite signal strength
		meter.
		The best signal is achieved when the
		antenna is pointing to the southern sky
		through an unobstructed window.
		4-4.SAT Radio
		XM Antenna Aiming
		Satellite	Terrestrial
		If you cannot receive a satellite signal,
		position the XM Mini-Tuner System so
		that as many bars as possible (up to 3)
		appear on the XM Terrestrial signal
		strength meter.

Notes:

•So long as the signal strength is good, you can enjoy XM Radio by using either satellite or terrestrial recep- tion.

•Terrestrial signals are only available in certain areas.

•The XM information is only displayed when the Sat- ellite Radio mode is set to XM or XM/SIRIUS (see page 70).

•If you’re using both XM Satellite Radio and SIRIUS Satellite Radio and the Satellite mode is set to XM/SIRIUS (see page 70), signal strength meters for both systems appear on the same screen.

XM Radio Messages

The following messages may appear while using XM Satellite radio.

❑CHECK ANTENNA

The XM antenna is not properly connected to the Mini-Tuner Dock. Check the connection. Check the antenna cable for damage.

❑UPDATING

XM is updating your Mini-Tuner with the latest encryption code. Wait a few seconds until the update is done. Alternatively, you may be attempting to tune to a channel that is blocked or that you cannot receive with your subscription package. To receive that channel, contact XM Satellite Radio.

❑NO SIGNAL

The XM Mini-Tuner cannot receive the satellite sig- nal. Check the XM antenna for obstructions to the southern sky. Check the antenna positioning with the Antenna Aiming function (see left column).

❑LOADING

The AV receiver is tuning or decoding audio or text data. Please wait. If this occurs often, check the XM antenna position with the Antenna Aiming function (see left column).

❑OFF AIR

The XM channel you selected is not currently broad- casting. Select another channel.

❑UPGRADE XM TUNER

The connected XM CNP-1000 is incompatible. The AV receiver features advanced technology that is designed for use with the XM Mini-Tuner. Contact XM Listener Care and ask about upgrading your XM CNP-1000 to an XM Mini-Tuner. Have the AV receiver’s model name and CNP-1000 XM ID num- ber ready beforehand, and explain that your AV receiver is displaying the message “Upgrade XM Tuner.” If you already have an XM Mini-Tuner con- nected and you see this message, turn off the AV receiver, make sure the XM Mini-Tuner is properly seated in the Mini-Tuner Dock, and then turn the AV receiver back on again. If the message reappears, contact XM Listener Care and explain the issue that you’re experiencing and the corrective actions you’ve tried.

❑CHECK XM TUNER

The AV receiver is having difficulty communicating with the XM Mini-Tuner module. Make sure the XM Mini-Tuner is properly seated in the Mini-Tuner Dock. And make sure the Mini-Tuner Dock cable is properly connected to the AV receiver and is not damaged. If the issue persists, contact XM Listener Care. Have the AV receiver’s model name ready beforehand, and explain the issue that you’re experi- encing and the corrective actions you’ve tried.

❑Unavailable Channel

You may be attempting to select a channel that is unavailable or has changed to a different channel number. Check xmradio.com for the latest channel listing.

73