Common Functions—Continued

Using the Sleep Timer

With the sleep timer, you can set the AV receiver so that it turns off automatically after a specified period.

Sleep

 

Press the remote controller’s

 

 

[Sleep] button repeatedly to

 

 

select the required sleep time.

 

 

You can set the sleep time from 90 to 10

 

 

minutes in 10 minute steps.

 

 

The SLEEP indicator appears on the

 

 

display when the sleep timer has been

 

 

set, as shown. The specified sleep time

 

 

appears on the display for about 5 sec-

 

 

onds, then the previous display reap-

 

 

pears.

 

 

SLEEP indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To cancel the sleep timer, press the [Sleep] button repeatedly until the SLEEP indicator disappears.

To check the remaining sleep time, press the [Sleep] button. Note that if you press the [Sleep] button while the sleep time is being displayed, you’ll shorten the sleep time by 10 minutes.

Using Headphones

For private listening, you can connect a pair of stereo headphones (1/4-inch phone plug) to the AV receiver’s Phones jack.

Notes:

Always turn down the volume before connecting your headphones.

While the headphones plug is inserted in the Phones jack, the speakers are turned off and the Headphone indicator lights up. (The Powered Zone 2 speakers are not turned off.)

When you connect a pair of headphones, the listening mode is set to Stereo, unless it was already set to Mono, Stereo, or Direct, in which case it stays the same.

Displaying Source Information

You can display various information about the current input source as follows.

Remote

Press the [Display] button

controller

repeatedly to cycle through the

 

Display

available information.

 

AV receiver

 

The following information can typically be displayed:

Input source Listening

mode

Signal format*

Sampling frequency

*If the input signal is analog, no format information is displayed. If the input signal is PCM, the sampling fre- quency is displayed. If the input signal is digital but not PCM, the signal format and the number of channels is displayed. For some digital input signals, including mul- tichannel PCM, the signal format, number of channels, and sampling frequency is displayed.

Information is displayed for about 3 seconds, then the previous display reappears.

84

Page 84
Image 84
Integra DTR-8.8 instruction manual Common Functions, Using the Sleep Timer, Using Headphones, Displaying Source Information

DTR-8.8 specifications

The Integra DTR-8.8 is a high-performance AV receiver designed for home theater enthusiasts who demand exceptional sound quality and advanced features. This unit combines cutting-edge technology with a user-friendly interface, making it an ideal choice for both beginners and seasoned audiophiles.

One of the standout features of the Integra DTR-8.8 is its robust amplification system. It utilizes discrete high-current amplifiers that ensure high-quality audio output across all channels. This ensures that every movie, music track, or gaming experience is delivered with clarity and precision. The receiver is capable of delivering a powerful 100 watts per channel, providing ample power to drive even the most demanding speakers.

The DTR-8.8 supports a wide range of audio formats, including Dolby Atmos, DTS:X, and IMAX Enhanced, allowing for an immersive audio experience that envelops the listener. This is complemented by the receiver’s advanced room calibration technology, AccuEQ, which optimizes sound according to the specific acoustics of the room. This feature enhances the listening experience, making it sound as if the audio is coming from all directions, thus creating a theater-like ambiance at home.

In addition to its audio capabilities, the Integra DTR-8.8 is equipped with robust video processing features. It offers 8K video upscaling and HDR support, ensuring that the visual experience is equally as impressive as the audio. The receiver is compatible with multiple HDMI inputs, allowing users to connect various devices like gaming consoles, Blu-ray players, and streaming devices easily.

Overall, the Integra DTR-8.8 is not just about performance; it also includes smart features for convenient operation. With built-in Wi-Fi and Bluetooth, users can stream music directly from their smartphones or connect to various online music services. It also supports voice control through Alexa and Google Assistant for added convenience.

The receiver’s design is sleek and modern, featuring a user-friendly interface that makes navigation intuitive. With the Integra DTR-8.8, consumers get a powerful receiver packed with the latest technologies, ensuring an unparalleled home theater experience. Its combination of audio fidelity, advanced video processing, and smart integration truly sets it apart in the competitive realm of A/V receivers.