Connecting Integra/Onkyo Components

Connecting Your Components—Continued

Step 1: Make sure that each Integra/Onkyo component is connected to the AV receiver with an analog audio cable (RCA).

Step 2: Make the necessary connections (see illustration below).

Step 3: If you’re using an MD, CDR, or RI DOCK component, change the Input Display (see page 52).

With (Remote Interactive), you can use the following special functions:

Auto Power On/Standby

When you start playback on a component connected via , if the AV receiver is on Standby, it will automatically turn on and select that component as the input source. Similarly, when the AV receiver is set to Standby, all components

connected via will also go on Standby. This function will not work with components that are connected to an AC OUTLET on the AV receiver.

Direct Change

When playback is started on a component connected via , the AV receiver automatically selects that component as the input source. If your DVD player is connected to the AV receiver’s multichannel input, you’ll need to press the [Audio Selector] button repeatedly and select Multich to hear all channels (see page 85), as the Direct Change function selects the DVD IN L/R jacks.

Remote Control

You can use the AV receiver’s remote controller to control your other -capable Integra/Onkyo components. You must enter the appropriate remote control code ﬁrst (see page 133). And remember to point the remote controller at the AV receiver and not the other component.

Notes:

•Use only cables for connections. cables are supplied with Integra/Onkyo players (DVD, CD, etc.).

•Some components have two jacks. You can con- nect either one to the AV receiver. The other jack is

for connecting additional -capable components.

•Connect only Integra/Onkyo components to jacks. Connecting other manufacturer’s components may cause a malfunction.

•Some components may not support all functions. Refer to the manuals supplied with your other Inte- gra/Onkyo components.

•While Zone 2 or Zone 3 is on, the Auto Power

On/Standby and Direct Change functions do not work.

REMOTE CONTROL

					IN
					L
					R
			HDMI		AC INLET
RS232	IN 4	IN 3	IN 2	IN 1	CD
				ANTENNA	ETHERNET
COMPONENT VIDEO				AM	FM75
IN 3	IN 2 IN 1(DVD)

Y
			AUX 1	GAME/TV	CBL/SAT	VCR/DVR	DVD	IR
C /P							A	B	C
C /P
									12V TRIGGER OUT	FRONTSW
C /P								A	B	FRONTSW
L	L									L	L
											L
R	R									R
PHONO	CD	TAPE	AUX 1	GAME/TV	CBL/SAT	VCR/DVR	DVD		PRE OUT	PRE OUT

ZONE2 R

SURR BACK R

FRONT R

SURR R

CENTER

SURR L

FRONT L

SURR BACK L

ZONE2 L

DVD

e.g., CD player

R L

ANALOG

AUDIO OUT

e.g., DVD player

R L

ANALOG

AUDIO OUT

Connecting the Power Cord

•Before connecting the power cord, connect all your speakers and AV components.

•Connect the power cord to the AV receiver’s AC INLET.

•Plug the other end of the power cord into a suitable wall outlet.

•Turning on the AV receiver may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit.

DTR-8.8 specifications

The Integra DTR-8.8 is a high-performance AV receiver designed for home theater enthusiasts who demand exceptional sound quality and advanced features. This unit combines cutting-edge technology with a user-friendly interface, making it an ideal choice for both beginners and seasoned audiophiles.

One of the standout features of the Integra DTR-8.8 is its robust amplification system. It utilizes discrete high-current amplifiers that ensure high-quality audio output across all channels. This ensures that every movie, music track, or gaming experience is delivered with clarity and precision. The receiver is capable of delivering a powerful 100 watts per channel, providing ample power to drive even the most demanding speakers.

The DTR-8.8 supports a wide range of audio formats, including Dolby Atmos, DTS:X, and IMAX Enhanced, allowing for an immersive audio experience that envelops the listener. This is complemented by the receiver’s advanced room calibration technology, AccuEQ, which optimizes sound according to the specific acoustics of the room. This feature enhances the listening experience, making it sound as if the audio is coming from all directions, thus creating a theater-like ambiance at home.

In addition to its audio capabilities, the Integra DTR-8.8 is equipped with robust video processing features. It offers 8K video upscaling and HDR support, ensuring that the visual experience is equally as impressive as the audio. The receiver is compatible with multiple HDMI inputs, allowing users to connect various devices like gaming consoles, Blu-ray players, and streaming devices easily.

Overall, the Integra DTR-8.8 is not just about performance; it also includes smart features for convenient operation. With built-in Wi-Fi and Bluetooth, users can stream music directly from their smartphones or connect to various online music services. It also supports voice control through Alexa and Google Assistant for added convenience.

The receiver’s design is sleek and modern, featuring a user-friendly interface that makes navigation intuitive. With the Integra DTR-8.8, consumers get a powerful receiver packed with the latest technologies, ensuring an unparalleled home theater experience. Its combination of audio fidelity, advanced video processing, and smart integration truly sets it apart in the competitive realm of A/V receivers.

Integra DTR-8.8 Connecting Integra/Onkyo Components, Connecting the Power Cord, Direct Change

Models: DTR-8.8

Connecting Your Components—Continued