Integra DTR-8.8 instruction manual Component Video Input Setup

First Time Setup—Continued

Component Video Input Setup

--/--- 10	11	12
Input Selector
	Macro
1	2	3	Zone3
	Remote Mode
DVD	VCR	CD	Zone2
	CDR/MD/Dock			1
TV	Cable	Net/USB	Receiver
	SAT		Tape/AMP
Dimmer			Sleep
2, 3	nu	Me		2–4
	Me
	op	nu
	T
+
CH	Enter		VOL
Disc
Album
-	G
		it
	uide	Ex

2

Enter

Enter

Use the Up and Down []/[ ] buttons to select “1. Input/Output Assign,” and then press [Enter].

The Input/Output Assign menu appears.

1, 5	Prev	Se				n
	CH		tup		ur
				Ret
	Display					Muting
	Rec			Playlist		Random
		Li t		i M	d

If you connect a video component to a COMPONENT VIDEO IN, you must assign that input to an input selector. For example, if you connect your DVD player to COMPONENT VIDEO IN 3, you must assign COM- PONENT VIDEO IN 3 to the DVD input selector.

By default, the DVD input selector is assigned to COM- PONENT VIDEO IN 1, and all of the other input selec- tors (i.e., VCR/DVR, CBL/SAT, GAME/TV, AUX 1, AUX 2, TAPE, CD, PHONO) are assigned to the “- - -”

3

Enter

Enter

Use the Up and Down []/[ ] buttons to select “3. Component Video Input,” and then press [Enter].

The Component Video Input menu appears.

1-3.Component Video Input

DVD	IN1
VCR/DVR	---
CBL/SAT	---
GAME/TV	---
AUX1	---
AUX2	---

option.

If you’ve connected your TV to the AV receiver with a component video cable, you can set the AV receiver so that composite video and S-Video sources are upcon- verted (*) and output by the COMPONENT VIDEO MONITOR OUT 1 or 2. You can set this for each input selector by selecting the “- - -” option.

Composite video, S-Video	Component video
IN
(*)
OUT
Composite video, S-Video	Component video

4

Enter

Enter

Use the Up and Down [ ]/[ ] buttons to select an input selec- tor, and use the Left and Right []/[ ] buttons to select:

IN1: Select if the video component is connected to COMPO-

NENT VIDEO IN 1.

IN2: Select if the video component is connected to COMPO-

NENT VIDEO IN 2.

IN3: Select if the video component is connected to COMPO-

NENT VIDEO IN 3.

-- -:Select to output composite video and S-Video sources from the COMPONENT VIDEO OUT.

1	Press the [Receiver] button, fol-
Receiver	lowed by the [Setup] button.
	The main menu appears onscreen.
S
et
u
p

5	Press the [Setup] button.
	Setup closes.
	S
	et
	u
	p

Notes:

•For composite video and S-Video upconversion for the COMPONENT VIDEO MONITOR OUT 1 or 2, the HDMI Monitor setting must be set to Main or Sub (see page 48). See page 30 for more informa- tion on video signal flow and upconversion.

•This procedure can also be performed on the AV

receiver by using its [Setup], [Enter], and arrow buttons.

51