Intel D925XCV, D925XBC specifications BIOS Error Messages continued, Explanation

Intel Desktop Board D925XCV/D925XBC Technical Product Specification

Table 48. BIOS Error Messages (continued)

Error Message	Explanation
Update OK!	NVRAM was invalid and has been updated.
Updated Failed	NVRAM was invalid but was unable to be updated.
Keyboard Error	Error in the keyboard connection. Make sure keyboard is
	connected properly.
KB/Interface Error	Keyboard interface test failed.
Memory Size Decreased	Memory size has decreased since the last boot. If no memory was
	removed then memory may be bad.
Memory Size Increased	Memory size has increased since the last boot. If no memory was
	added there may be a problem with the system.
Memory Size Changed	Memory size has changed since the last boot. If no memory was
	added or removed then memory may be bad.
No Boot Device Available	System did not find a device to boot.
Off Board Parity Error	A parity error occurred on an off-board card. This error is followed
	by an address.
On Board Parity Error	A parity error occurred in onboard memory. This error is followed
	by an address.
Parity Error	A parity error occurred in onboard memory at an unknown
	address.
NVRAM/CMOS/PASSWORD cleared by	NVRAM, CMOS, and passwords have been cleared. The system
Jumper	should be powered down and the jumper removed.
<CTRL_N> Pressed	CMOS is ignored and NVRAM is cleared. User must enter Setup.

104