Technical Reference
+
−
N/C
Power
Switch
Power LED
−
+
Green Red
8
6
4
2
9 | +5 V DC |
7Reset
Purple5 Switch
3 | Yellow | − | Activity LED |
|
|
| Hard Drive |
1 |
| + |
|
OM17000
Figure 23. Connection Diagram for Front Panel Connector
2.8.2.4.1Hard Drive Activity LED Connector [Yellow]
Pins 1 and 3 [Yellow] can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires one of the following:
•A Serial ATA hard drive connected to an onboard Serial ATA connector
•An IDE hard drive connected to an onboard IDE connector
2.8.2.4.2Reset Switch Connector [Purple]
Pins 5 and 7 [Purple] can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST.
2.8.2.4.3Power/Sleep LED Connector [Green]
Pins 2 and 4 [Green] can be connected to a one- or
Table 34. States for a
LED State | Description |
|
|
Off | Power off/sleeping |
|
|
Steady Green | Running |
|
|
Table 35. States for a
LED State | Description |
|
|
Off | Power off |
|
|
Steady Green | Running |
|
|
Steady Yellow | Sleeping |
|
|
77