Intel D925XCV, D925XBC Front Panel USB Connectors, Power Switch Connector Red, Integrator’S Notes

Intel Desktop Board D925XCV/D925XBC Technical Product Specification

✏NOTE

The colors listed in Table 34 and Table 35 are suggested colors only. Actual LED colors are product- or customer-specific.

2.8.2.4.4Power Switch Connector [Red]

Pins 6 and 8 [Red] can be connected to a front panel momentary-contact power switch. The switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power supply to switch on or off. (The time requirement is due to internal debounce circuitry on the board.) At least two seconds must pass before the power supply will recognize another on/off signal.

2.8.2.5Front Panel USB Connectors

Figure 24 is a connection diagram for the front panel USB connectors.

INTEGRATOR’S NOTES

•The +5 V DC power on the USB connector is fused.

•Pins 1, 3, 5, and 7 comprise one USB port.

•Pins 2, 4, 6, and 8 comprise one USB port.

•Use only a front panel USB connector that conforms to the USB 2.0 specification for high- speed USB devices.

Power

(+5 V DC)

One	D−
USB
Port	D+

1

3

5

2

4

6

Power
(+5 V DC)
D−	One
	USB
D+	Port

Ground

7 8

Ground

Key (no pin)

10

No Connect

OM15963

Figure 24. Connection Diagram for Front Panel USB Connectors

78