PXE Base Code Protocol
Version 1.02 12/12/00 249
Status Codes Returned
EFI_SUCCESS The PXE Base Code Protocol was started.
EFI_INVALID_PARAMETER One of the parameters is not valid.
EFI_UNSUPPORTED UseIpv6 is TRUE, but the Ipv6Supported field of the
EFI_BASE_CODE_MODE structure is FALSE.
EFI_ALREADY_STARTED The PXE Base Code Protocol is already in the started state.
EFI_DEVICE_ERROR The network device encountered an error during this operation.
EFI_OUT_OF_RESOURCES Could not allocate enough memory or other resources to start the
PXE Base Code Protocol.