Intel L440GX Removing DIMMs

Figure 4. Installing DIMMs

Removing DIMMs

CAUTION

Use extreme care when removing a DIMM. Too much pressure can damage the socket slot. Apply only enough pressure on the plastic ejector levers to release the DIMM.

1.Observe the safety and ESD precautions at the beginning of this chapter.

2.Open the server.

3.Gently push the plastic ejector levers out and down to eject a DIMM from its socket.

4.Hold the DIMM only by its edges, being careful not to touch its components or gold edge connectors. Carefully lift it away from the socket, and store it in an antistatic package.

5.Repeat to remove other DIMMs as necessary.

6.Close the server.

7.Connect all external cables and the power cord to the server.

8.Turn on the monitor and then the server.

L440GX+ Server Board Product Guide 25