Figure 7. Replacing the Lithium Battery
1.Observe the safety and ESD precautions at the beginning of this chapter.
2.Open the chassis.
3.Insert the tip of a small flat bladed screwdriver, or equivalent, under the tab in the plastic retainer.
4.Gently push down on the screwdriver to lift the battery.
5.Remove the battery from its socket.
6.Dispose of the battery according to local ordinance.
7.Remove the new lithium battery from its package, and, being careful to observe the correct polarity, insert it in the battery socket.
8.Reinstall the plastic retainer on the lithium battery socket.
9.Close the chassis.
10.Run the SSU to restore the configuration settings to the RTC.
L440GX+ Server Board Product Guide | 31 |