Keyboard Submenu
Feature | Choices | Description |
|
|
|
Num Lock | On | Selects the power on state for Num Lock. |
| Off |
|
|
|
|
Key Click | Disabled | Enables or disables the audible key click. |
| Enabled |
|
|
|
|
Keyboard | 30/sec | Sets the numbers of time per second a key will repeat |
| 26.7/sec | while it is held down. |
| 21.8/sec |
|
| 18.5/sec |
|
| 13.3/sec |
|
| 10/sec |
|
| 6/sec |
|
| 2/sec |
|
|
|
|
Keyboard | 1/4 sec | Sets the delay before a key starts to repeat when it is |
| 1/2 sec | held down. |
| 3/4 sec |
|
| 1 sec |
|
|
|
|
Processor Settings Submenu
Feature | Choices | Description |
|
|
|
CPU Speed Setting | 350 MHz | Sets the speed for the installed processor(s). |
| 400 MHz |
|
| 450 MHz | CAUTION |
| 500 MHz | Attempting to set this higher than the proper |
| 550 MHz | |
| speed for the installed processor(s) may cause | |
| 600 MHz | |
| damage to the processor(s) or prevent the | |
|
| |
|
| server from booting until a CMOS clear is |
|
| preformed. |
|
|
|
CPU POST Speed Settings | N/A | This field is informational only. |
|
|
|
Processor Retest | Yes | Yes tells BIOS to clear the historical processor status |
| No | and retest all processors on the next boot. BIOS |
|
| automatically resets to No in next boot. |
|
|
|
Memory Cache | Enabled | Enables processor cache. |
| Disabled |
|
|
|
|
Processor 1 Stepping ID | N/A | This field is informational only. |
|
|
|
Processor 1 L2 Cache Size | N/A | This field is informational only. |
|
|
|
Processor 2 Stepping ID | N/A | This field is informational only. |
|
|
|
Processor 2 L2 Cache Size | N/A | This field is informational only. |
|
|
|
L440GX+ Server Board Product Guide | 39 |