You can make the following selections on the Advanced Menu itself. Use the submenus for the three other selections that appear on the Advanced Menu.
Feature | Choices | Description |
|
|
|
Installed OS | Other | Select Win95 if you are booting a Plug and Play capable |
| Win95 | operating system. |
|
|
|
Reset Configuration Data | No | Select Yes if you want to clear the server configuration |
| Yes | data during next boot. System automatically resets to No |
|
| in next boot. |
|
|
|
PCI Configuration |
| Enters submenu. |
|
|
|
Integrated Peripherals |
| Enters submenu. |
Configuration |
|
|
|
|
|
Advanced Chipset Control |
| Enters submenu. |
|
|
|
Use Multiprocessor | 1.1 | Selects the version of multiprocessor specification to use. |
Specification | 1.4 | Some operating systems do not support version 1.4. |
|
|
|
Large Disk Access Mode | CHS | Select CHS if your OS is DOS. A large disk has more than |
| LBA | 1024 cylinders, more than 16 heads, or more than 63 |
|
| tracks per sector. |
|
|
|
Delay on Option ROMs | Disabled | Forces a short delay at the end of each Option ROM scan. |
| Enabled |
|
|
|
|
PCI Configuration Submenu
The PCI Configuration Menu contains selections that access other submenus.
PCI Device, Embedded SCSI Submenu
Feature | Choices | Description |
|
|
|
Option ROM Scan | Enabled | Enables option ROM scan of the onboard SCSI chip. |
| Disabled | There are 2 SCSI channels that are controlled by the same |
|
| option ROM. |
|
|
|
Enable Master | Enabled | Enabled selects the device as a PCI bus master. |
| Disabled |
|
|
|
|
Latency Timer | Default | Minimum guaranteed time, in units of PCI bus clocks, that |
| 0020h | a device may be master on a PCI bus. |
| 0040h |
|
| 0060h | CAUTION |
| 0080h | Do not change this setting unless you fully |
| 00A0h | |
| understand the priority of this device on the | |
| 00C0h | |
| PCI bus. | |
| 00E0h | |
|
| |
|
|
|
40 | Configuration Software and Utilities |