Intermec F4 manual Supported IPL-3 Commands

	Appendix 4 Supported IPL-3 Commands
Supported IPL-3 Commands, cont.
IPL Command	Syntax
Field, Delete	D
Field, Select	<ESC>F
Field Data, Define Source	d
Field Decrement, Set	<ESC>D
Field Direction, Define	f
Field Increment, Set	<ESC>I
Field Origin, Define	o
First Data Entry Field, Select	<ACK>
Font, Transmit	<ESC>v
Font Character Width, Define	Z
Font Type, Select	c
Form Feed	<FF>
Format, Create or Edit	A or F
Format Direction in a Page, Define	q
Format, Erase	E
Format, Select	<ESC>E
Format, Transmit	<ESC>x
Format Direction in a Page, Define	g
Format Offset Within a Page, Define	O
Format Position From Page, Delete	m
Format Position in a Page, Assign	M
Formats, Print	f
Graphic Type, Select	c
Graphic or UDC, Define	u
Hardware Configuration Label, Print	h
Height Magnification of Bar, Box, or UDC, Define	h
Human-Readable Field, Create or Edit	H
IBM Language Translation, Enable or Disable	<SI>i
Increment and Decrement, Disable	<ESC>N
Intercharacter Space for UDF, Define	z
Interpretive Field, Edit	I
Interpretive Field, Enable or Disable	i
Label and Gap Length, Transmit	<ESC>L
Label Path Open Sensor Value, Transmit	L
Label Rest Point, Adjust	<SI>f
Label Retract, Enable or Disable	<SI>R
Label Retract Distance, Set	<SI>r
Label Stock Type, Select	<SI>T
Label Taken Sensor Value, Transmit	T
Length of Line or Box Field, Define	l

Intermec EasyCoder F4 – Installation & Operation IPL Version, Ed. 3 79