Appendix B — Media Specifications
Self-Adhesive Labels
a: Media Width |
|
|
Maximum: | 118.0 mm | 4.65 inches |
Minimum: | 25.0 mm | 1.00 inches |
b: Liner
The liner must extend evenly on both sides and not more than a total of 1.6 mm (0.06) inches outside the face material.
c: Label Width (excluding liner)
Maximum: | 116.4 mm | 4.58 inches |
Minimum: | 23.8 mm | 0.94 inches |
d: Label Length |
|
|
|
|
|
8 dots/mm (203 dpi) |
|
|
Maximum: | 1270 mm* | 50 inches |
Minimum: | 6 mm | 0.2 inches |
|
|
|
11.81 dots/mm (300 dpi) |
|
|
Maximum: | 558.8 mm* | 22 inches |
Minimum: | 6 mm | 0.2 inches |
*This is the print length limit set by memory constraints.
e:Label Gap
Maximum: | 26.0 mm | 1.02 inches |
Minimum: | 1.2 mm | 0.05 inches |
Recommended: | 3.0 mm | 0.12 inches |
The Label Gap sensor must be able to detect the front edges of the labels. It can be moved 0 to 57 mm (0 to 2.24 inches) from the inner edge of the media.
Paper Type Setup
• Labels with Gaps
58 | EasyCoder PD41 Printer User’s Guide |
