![](/images/new-backgrounds/1119580/119580105x1.webp)
Chapter 5 — Setting up the Printer
Testmode: Printing Test Labels
Data/
Step Ready Error RtW Button Comment
5The printer will then print four test labels after the testfeed in step 4. To skip any test labels tap the button.
Testmode: Running the Dump mode
Data/
Step Ready Error RtW Button Comment
6The printer is now in Dumpmode and the printer scans the communication ports. The printer will print any characters it received on the communication ports to a label when exiting dump mode.
7Tap the button once to exit Dumpmode. If you tap the button within two seconds of entering dump mode, no labels are printed.
8 | 1 | 1 | The printer will start as on |
|
|
| rebooted status. When |
operational, Data/Ready and RtW will be lit.
Extended Testmode
The extended testmode can be used to run additional tests. This includes the option to print test labels, running a testfeed in slow mode, entering dump mode and resetting to factory defaults. The extended Testmode is entered by raising the printhead, and switching power on while keeping the Print button pressed. Extended Testmode will run a sequence which can be controlled via the Print button, and raising or lowering the printhead. The sequence of steps in the Extended Testmode follows in the table:
EasyCoder PD41 Printer User’s Guide | 43 |