Appendix B — Media Specifications
Tickets with Black Mark
a: Media Width |
|
|
Maximum: | 118.0 mm | 4.65 inches |
Minimum: | 25.0 mm | 1.00 inches |
b: Copy Length |
|
|
|
|
|
8 dots/mm (203 dpi) |
|
|
Maximum: | 1270 mm* | 50 inches |
Minimum: | 6 mm | 0.2 inches |
|
|
|
11.81 dots/mm (300 dpi) |
|
|
Maximum: | 558.8 mm* | 22 inches |
Minimum: | 6 mm | 0.2 inches |
*This is the print length limit set by memory constraints.
c:Detection Position
Variable: | 0 to 57 mm 0 to 2.24 inches |
d: Black Mark Width
The detectable width of the black mark should be at least 5.0 mm (0.2 inches) on either side of the Label Gap Sensor detection point.
e: Black Mark Length |
|
|
Maximum: | 25.0 mm | 0.98 inches |
Minimum: | 3 mm | 0.12 inches |
Common: | 5 mm | 0.2 inches |
f: Black Mark Y-Position
It is recommended that you place the black mark as close to the front edge of ticket as possible and use a negative Stop Adjust value to control the media feed, so the tickets can be properly torn off.
Paper Type Setup
• Tickets with Mark
62 | EasyCoder PD41 Printer User’s Guide |
