Appendix C — Setup Parameters
Setup Description
The printer’s Setup parameters are used to set the printer’s operational behavior. Chapter 5, “Configuring Settings”, explains how to set or change the parameters, and this is also explained in the Fingerprint v10.X.X Programmer’s Reference Manual, under the SETUP command.
Serial Communication Setup
The serial communication parameters control the communication between the printer and the connected computer or other devices on the standard serial port, referred to as "uart1:".
For the serial communication channel ("uart1:"), the following parameters can be set. Make sure they match the setup of the connected device or vice versa. If the setup of the printer and the setup of the host do not match, the response from the printer to host will be garbled.
Baud Rate
The baud rate is the transmission speed in bits per second. There are 10 options:
•300
•600
•1200
•2400
•4800
•9600 (default)
•19200
•38400
•57600
•115200
66 | EasyCoder PD41 Printer User’s Guide |