Hard Disk Activity Light

IntraServer’s ITI-8000 Series adapters have a built in activity LED, which indicates when the SCSI bus is busy. The LED will flash to indicate activity on the bus.

Connecting External SCSI Devices

Optional cables are available from IntraServer for all external devices. See the cable selection Table 5 in this guide to determine the correct cable for your application. You will need to know the type of connector you require on each end of the cable, and the length of cable required.

Apply the same rules for ID and termination as for internal devices:

∙Only the end device on the bus (last device on the cable) should have termination enabled

∙Each device must have a unique SCSI ID

All IntraServer ITI-8000 Series modules will automatically enable or disable SCSI termination by sensing the cable configuration.

NOTE: If you are using external devices, the end of the external cable MUST be correctly terminated with an LVD Ultra2 terminator.

Page 32 of 83