The following tests are run when the test command is executed and the adapter is connected to a network.

∙qfe register

∙MAC Internal Loopback

∙100MBit PHY Loopback

∙100MBit TP Loopback

∙10MBit XCVR Loopback

Note: To test other channels of the adapter, you will need to execute the test command separately on each channel.

Note: After testing is complete use the following command:

ok setenv diag-switch? False

to turn off diagnostic mode. If diag-switch?is left as true the time for the system to initialize will increase.

Page 46 of 83